Care & Cleaning

For best results, keep the following in mind when caring for your KOHLER® product:

  • Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
  • Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
  • Do not allow cleaner to soak.
  • Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
  • Click here for warranty information.


* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.

    Shower Bases

    Cast Iron Shower Bases

    Cast Iron Shower Bases

    • Rinse thoroughly and use a soft cloth to wipe the product dry after each use.
    • Use a soft nylon brush on the receptor's Safeguard® slip-resistant surface.
    • Do not use steel wool, wire brushes or abrasive sponge pads.


    Cleaning instructions listed pertain only to their corresponding material, and are not intended for faucet cleaning. See faucet cleaning instructions for chrome and vitreous china. 

    Also see Shower Doors Cleaning Instructions. 


    Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

     

    Care Tip

    Cream-based cleaners may have a tendency to build up, reducing the friction on slip-resistant surfaces. Be sure to use a water-soluble cleaner (dissolves 100% in water).

    Acrylic Shower Bases

    Acrylic Shower Bases

    • Wipe shower receptor after each use with soft cloth or squeegee.
    • Do not use abrasive cleaners.
    • Avoid using aerosol products on the shower surface.


    Cleaning instructions listed pertain only to their corresponding material, and are not intended for faucet cleaning. See faucet cleaning instructions for chrome and vitreous china. 

    Also see Shower Doors Cleaning Instructions.

    Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

    Click here for warranty information or call Toll Free no. 1 800 103 224.

    * Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.